Sarox7+ Gen2 LED auxiliary light 100W

Ledson Sarox7+ Gen2 is the successor to Sarox7+ with item number 33491218 and the little brother to Sarox9+. With its 7″ size, this auxiliary light is suitable for slightly smaller vehicles or for those who prefer auxiliary lights that take up less space on the front. This smaller auxiliary light also features four powerful LEDs as position lights, allowing you to choose between xenon white or amber, just like the Sarox9+ and the rest of our auxiliary lights in the ‘+series’.

Sarox’s design is a combination of stylish and progressive, while the inside of the light impresses with quality components that make all the difference when you drive in the dark.

Generation 2 of Sarox7+ has been upgraded with even more brightness! How about: 1 lux brightness at 505 meters and 7800 actual lumens, protection against harsh climates on our Nordic roads with IP69K classification, E-markings (ECE R112 / R10 / R7), automatic pressure equalization, electronic heat management for optimal LED performance and life span, heat sink in aluminum, bracket in stainless steel …

Sarox 7+ has a combo beam pattern

The light has a combined light pattern, meaning that it both scatters light in a wide area close to the vehicle, but also focuses light far away. This beam pattern is ideal if you want a lot of light near the vehicle for the smaller roads but still have the length to light up the road far ahead.

What more is needed?

• Connection: Ledson Connect 4-pin cable harness, connect your auxiliary lights with a few clicks!
  With Connect, installation is simple – the cable harness with ready-made connectors fits all cars with halogen, xenon or LED high beams.
  Plug & Play: Avoid complicated installations – connect directly with the included wire tap connector or adapter cable (accessory), no damage to the car’s original wiring.
  Smart functionality: Control both auxiliary lights and position lights directly via the wiring.
  Flexible: Add switch harness (7801009) to be able to turn off the auxiliary lights in fog or snow.
  Compatible with XBB: Perfect solution for cars with Xenon or LED – no damage to the original wiring with XBB Dongle and Power Unit.
• Mounting on the vehicle: Can be mounted directly on the vehicle (drill in a suitable place) or a little smoother and more stylish using a number plate holder

Specifications:

• With position light, yellow-orange or xenon white (connect the color you want)
• Combo beam pattern
• E-marked ECE R112 (Ref. 50), R10 / R7 (white position light) 
• Range: 1010 m (0,25 lux), 505 m (1 lux)
• EMC secured
• 9800 lumen (raw), 7800 lumen (actual)
• Cold white light (6000K)
• TIR (Total Inner Reflection)
• ETM (Electronic Thermal Management)
• Side reflective optical system
• Pressure equalization membrane
• Aluminum heatsink
• Adjustable bracket in stainless steel
• Lexan polycarbonate front cover
• Polycarbonate Lens
• 36 month warranty

Technical data:

• 100W (4 x 20W LED + 4 x 5W LED)
• IP69K (water and dust proof)
• DT connector 4 pin supplied
• Voltage 9-36 V
• Main light load: 7,3A @ 12V and 3,4A @ 24V

Dimensions & weight:

• Width: 180 mm
• Height: 180 mm (192 mm incl bracket)
• Depth: 68 mm
• Cable length: 42 cm
• Weight: 1,15 kg

Supplied:

• Ledson Sarox7+ Gen2 LED light 7″
• Bracket, bolts and screws for attaching the auxiliary light with either one or two attachment points
• DT Connector (4-pin) (you will also need a DT harness )
• Installation instructions

Installation instructions for cables (detailed instructions included with the product):

• Red: Auxiliary light (+)
• Black: Auxiliary light / Position light (- ground)
• White: Position light (+) white light
• Yellow: Position light (+) yellow-orange light

NOTE: The DT connector must not be cut, as this increases the risk of moisture damage and the warranty will cease to apply.